Cuberite Forum - Plugin Releases

QUARRY

Sun, 11 May 2025 16:23:36 +0000

For those who are tired of digging, I present the new Quarry plugin.

In order for a quarry to work, you need to:
1). Build a fence of nether brick fence ranging in size from 7x7 to 34x34 blocks.

2). Install the chest next to the fence

3). Install a plaque on top of the chest with the inscription in the first line: [quarry] or:
[quarry+] the quarry will arrange ladders and torches.
[quarry-] the quarry will not collect cobblestones, only minerals.
(you can use a combined option e.g [quarry-+] or [quarry+-])
[quarry*] The quarry will not destroy blocks, it will collect only minerals without destroying them.
You can use one quarry multiple times at the same location.
(It doesn't make any difference which letters to write. E.g [quARry+] will also work)

4). Connect the redstone signal to the chest.

5). Enjoy

P.S. The quarry forcibly loads the area around it while it is working.
You can leave it or leave the server altogether, the quarry will continue to work until it reaches the bedrock.

P.P.S Only one quarry can exist at one time. When creating a new sign, the other quarry will be disabled.

Download ZIP:

  Quarry.zip (Size: 6.64 KB / Downloads: 286)

  2025-05-11_00.56.21.png (Size: 322.06 KB / Downloads: 652)

  2025-05-11_00.55.42.png (Size: 224.22 KB / Downloads: 624)

  2025-05-11_00.56.03.png (Size: 285.9 KB / Downloads: 627)

Lapis Portals

Fri, 10 Jan 2025 18:41:01 +0000

Creating teleportation booths.

fork of the famous bukkit plugin...

To create a portal, you need to build 2 cabins from lapis blocks,
install an oak door and
install a sign with lines:
line1 = [lp]
line2 = coordinate X other portal
line3 = coordinate Y other portal
line4 = coordinate Z other portal

the portal should look like in the picture

lapisportals.png (Size: 143.44 KB / Downloads: 409)

When everything is ready, enter the booth and close the door.

LapisPortals.zip (Size: 1.9 KB / Downloads: 286)

Expirience holder

Thu, 09 Jan 2025 18:37:43 +0000

ExpBank - The Game Experience Bank

Create a sign with the first line [expbank]

Right click - take some experience
Left click - save some experience

The sign becomes personal the first time you use it.

ExpBank.zip (Size: 1.28 KB / Downloads: 233)

Private

Thu, 09 Jan 2025 18:33:15 +0000

Allows you to restrict other players' access to chests, doors, switches, and beds.
Enter the /private command and click on the block.
For double blocks, you need to protect each block.

Private.zip (Size: 2.07 KB / Downloads: 236)

Random Teleport

Thu, 09 Jan 2025 18:29:49 +0000

A simple plugin that teleports the player to random coordinates of the world with the /rtp command.
Default: -2000/2000 (is changeable)

I allow you to make any changes to the plugin.

RTP.zip (Size: 1.04 KB / Downloads: 287)

ChunkLoader

Thu, 09 Jan 2025 18:12:33 +0000

The plugin allows you to install a sign, the first line of which contains "[chunkloader]".
The sign keeps the chunks around the 3x3 chunk area always loaded and prohibits aggressive mobs from spawning in them.
When you click right btn on the sign, in the corners of the area effect turns on/off.

I allow you to make any changes to the plugin.

P.S. For some reason, the disappearance of leaves does not work... If you know how to fix it, write to us.

ChunkLoader.zip (Size: 2.81 KB / Downloads: 264)

ServerSettings: Easy server and world configuration through the webadmin

Sat, 03 Aug 2024 20:44:33 +0000

Adds webadmin tabs to more easily change the server settings. This includes:

Settings in the settings.ini
Settings in every world's world.ini
Uploading new plugins through the webadmin

If settings are not relevant they are not shown. For example you won't see settings for villages if the world does not have villages enabled.

A list of all the changes can be reviewed before applying them.

Source: https://github.com/NiLSPACE/ServerSettings
Download: https://github.com/NiLSPACE/ServerSettings/releases

ChunkGen

Mon, 10 Jun 2024 09:31:12 +0000

Inspired by ChunkWorx this plugin allows the user to easily (re)generate chunks from the webadmin. ChunkWorx still works, but it's been 10 years since anyone has looked at the code. There are lots of magic numbers which makes maintaining the code harder. The interface also loses it's state everytime there is a reload which makes development on the world generator more frustrating. This plugin tries to solve all these issues and add some more functionality to make world generator development easier.

Some advantages over ChunkWorx:

Interface state isn't lost when Cuberite reloads.
Allow any radius around a player instead of just the exact chunk or 3x3.
Shows statistics about the generator, lighting and storage queues.
The to be generated chunks can spiral around a set of coordinates or a player which allows you to see the new chunks immediately instead of waiting for the updates to finally catch up to you.

Commands

General

/reg - Regenerates chunks around the player or cancel the previous task.
Permission required: chunkgen.reg
The following parameter combinations are recognized:
/reg - Generates chunks around you in the specified radius.
/reg cancel - Stops your last chunk generation tasks.

Permissions

- chunkgen.reg -
- Commands affected:
  - /reg

Source: https://github.com/NiLSPACE/ChunkGen

MazeGen plugin: generate mazes

Mon, 08 Apr 2024 21:27:44 +0000

https://github.com/madmaxoft/MazeGen

Plugin that allows users to generate mazes. Requires WorldEdit to be installed. To generate a maze, select an area using WorldEdit, then invoke the `/mg` command, specifying parameters as needed.

The plugin can also be used through the server console, specifying the world and coords as parameters, rather than reading them from a player's WorldEdit selection.

Technical
Internally, the plugin uses the Recursive backtracker algorithm to generate the maze. Due to Lua having a limited stack depth of 100 levels only, instead of using the call-stack, the plugin keeps its own stack of cells to backtrack to.

Commands

General

/mg - Generates a maze
Permission required: mazegen.mg
The following parameter combinations are recognized:
/mg BlockType [CellSize] [ExtraPassagesPercent]

Permissions

- mazegen.mg -
- Commands affected:
  - /mg

Meteors

Sun, 11 Jun 2023 18:20:32 +0000

Meteors

(my first plugin)

Plugin that adds new randomly generated structure, meteors! Falling from sky, they cast thunderbolts. Inside this meteor is chest, with very good loot!

Commands:
/meteors prob [number]
- change the probability of a meteor per chunk. Note: this method changes the value for a while and after the full reload, it will return to the default value written in code.

Installation:
1. Download Meteors.lua from the releases page.
2. Open your server Plugins folder.
3. Make a Meteors folder inside.
4. Copy Meteors.lua to the newly created folder.

[plugins.cuberite.org] [GitHub]

Happy travelling!

Двойные двери

Sat, 07 Jan 2023 15:49:57 +0000

Hi, this is my second plugin...
This a simple plugin, which open both doubledoors when right click on any door.

DoubleDoors.zip (Size: 1.87 KB / Downloads: 474)

WorldBorder

Thu, 22 Dec 2022 20:24:16 +0000

Hello everyone!
This is my first plugin.
Creates a restriction of movement in the world.
Default 1000 blocks from Spawn.

Permissions: * (Only Administrator)

Commands: /wb - Show current limit and writing parameters
/wb [world] [radius] - Set radius from Spawn

When the limit is reached, the player throws back to the center of the area with particle and sound effects...

If there are errors in the code, please write about them...

WorldBorder.zip (Size: 1.48 KB / Downloads: 945)

HomeSetter - /sethome & /home

Fri, 22 Jul 2022 13:56:21 +0000

This plugin provides the ability to manage your homes

Lightweight & Fast
The entire plugin fits on ~10KiB of disk space & has no unnecessary functionality.

Set your homes
With this plugin, you can set home points and adjust the maximum number of them through permissions. You can teleport to homes through all dismensions!

Check your homes list
Use /homes to see existing homes and their amount

Commands

General

/delhome - Delete home
Permission required: homesetter.delhome
The following parameter combinations are recognized:
/delhome [home] - Name of the home that should be deleted

/home - Teleports you to a home
Permission required: homesetter.home
The following parameter combinations are recognized:
/home [home] - Name of the home to teleport to

/homes - List of homes
Permission required: homesetter.homes

/sethome - Set a home
Permission required: homesetter.sethome
The following parameter combinations are recognized:
/sethome [home] - Name of the home that should be set

Permissions

- homesetter.delhome - Allows the players to delete their homes.
- Commands affected:
  - /delhome
- Recommended groups: Default
- homesetter.home - Allows the players to teleport to their homes.
- Commands affected:
  - /home
- Recommended groups: Default
- homesetter.homes - Allows the players to view a list of their homes.
- Commands affected:
  - /homes
- Recommended groups: Default
- homesetter.maxhomes.3 - Maximum number of homes to be set
- Recommended groups: Default
- homesetter.sethome - Allows the players to set their homes.
- Commands affected:
  - /sethome
- Recommended groups: Default

Download: Github Releases or Github Source Code.
The plugin is also listed on plugins.cubrerite.org

Dupe Plugin v1.0

Tue, 01 Jun 2021 20:39:06 +0000

Hi! i made a simple plugin to duplicate items, perfect for VIP perks, or anarchy servers.

How it works?

Just use /dupe (with an item on your hand) and you will get a duped object of it. (Not stackable items as armor, & tools, not tested on shulkers).

a BIG thanks to Krystilize & 12xx12 helping me along this script.

Permissions:

dupe.dupe - Recommended for Vips

Commands

/dupe - dupe the item on your hand

Jmaniacs-Dupe-System.zip (Size: 1.33 KB / Downloads: 683)

cVanish - Vanish plugin for Cuberite

Sun, 25 Apr 2021 14:29:30 +0000

cVanish

Become invisible in Cuberite!

cVanish allows admins to vanish theirself, and check players without being seen.
Very useful tool to catch x-rayers.

Installation:

Download cVanish from here.
Extract the downloaded .zip file.
Put the extracted folder in /Plugins
Edit /settings.ini and add cVanish=1 under [Plugins]
Restart the server.

Commands:

/vanish: Vanish yourself.

Permissions:

fede.vanish: Permission to execute command /vanish.

Proudly made in Italy